Chimney Company in Century City — Flat-Price Sweep, Photo Report Included

Chimney Company in Century City, CA

Chimney repair in Century City typically costs $185 – $3,200 depending on whether the job is a cap replacement, flashing repair, or a full liner install, and most condo jobs are coordinated through building management. Century City is the 90067 ZIP code: a dense cluster of mid- and high-rise condominium towers built on the old 20th Century Fox backlot, with a smaller ring of single-family homes near the Westwood and Beverly Hills edges. The work here is not the suburban wood-burning chimney service you’d expect elsewhere. It’s gas-log fireplace flues in luxury towers, decorative masonry chimneys that see a fire maybe four nights a year, and HOA access windows that shape every appointment. Hickory Chimney Sweep has served Century City since 2013, and we handle the building-access realities of Avenue of the Stars condos the same way we handle a detached-home chase on the eastern edge of the ZIP.

Call (855) 554-2841

If you’ve got a concrete question, call (855) 554-2841 and you’ll get a direct answer, not a sales script.

Why Century City Homes Are Different

Century City’s housing stock changes the chimney job before we even arrive. Most of the 90067 buildings are mid- and high-rise condominium and office towers put up between the 1960s and the 2000s. The fireplaces inside them are largely gas-converted or decorative, with pre-fab metal flues or original masonry runs that have not carried a real wood fire in decades. On the edges of the ZIP, toward Westwood and Beverly Hills, there’s a pocket of low-rise apartments and single-family homes where wood-burning fireplaces are still used, but even those burn lightly by national standards.

Climate is the second factor. Century City’s mild, dry weather means fireplaces are seasonal decorations for most of the year. That sounds easy, but idle flues collect what the wind delivers. Santa Ana events push soot, leaves, and fine grit down through caps and into unused flues, and we regularly find that as the main reason a Century City fireplace fails an inspection or smells when a gas log finally gets lit in December. Creosote loads are light here because usage is light, but debris blockages and deteriorated caps are common precisely because the systems sit unused for months at a time.

Access is the third piece, and it shapes every tower job. The high-rise condos along Avenue of the Stars and Constellation Boulevard typically route contractors through freight elevators on a schedule set by building management. A sweep or repair that takes two hours at a house can take half a day in a tower because of elevator windows, HOA notification requirements, and concierge check-in. We know that rhythm, and we build it into our scheduling and our estimates rather than treating it as a surprise.

Homeowners in Century City often want a fireplace serviced because a sale or refinance is pending, or because a building inspection flagged the flue, not because they’ve been burning wood every weekend. That changes the job: the goal is usually documentation-quality cleaning, verified cap and crown condition, and confirmation the gas log venting is safe, not removal of heavy creosote.

Our Main Century City Services

Most Century City homeowners call us for one of two jobs, and the two overlap more than people expect. One call can schedule both, and both are fire-safety work in our book.

Chimney Sweep in Century City

Chimney sweeping in Century City is mostly about clearing what sits and settles in flues that are rarely used. In the towers, the fireplace is often gas or decorative, and the sweep is about removing accumulated debris, confirming the damper operates, and making sure the flue is clear for inspection or resale. In the smaller number of single-family homes on the edges of 90067, we see more creosote but still far less than colder-climate cities. A Century City sweep typically runs $175 – $350, and every sweep includes a camera inspection so you see what we see. Full details are on our Chimney Sweep in Century City page, where we break down the process, pricing, and what’s included in the inspection.

Dryer Vent Cleaning in Century City

The same mild climate and tower living that affect Century City chimneys affect dryer vents. Long vent runs in high-rise buildings collect lint over time, and a clogged dryer vent is a leading cause of residential fires. Century City condos often have vertical or extended vent runs that make regular cleaning more important, not less. Our Dryer Vent Cleaning in Century City page covers the full process, but the short version is this: one visit addresses a fire risk that lives in your laundry room, not your fireplace, and Century City building managers frequently request both services together for the convenience of one vendor and one access schedule.

Chimney Repair in Century City

Chimney repair in Century City runs from a simple cap replacement at $185 up to a full flue relining at $3,200, depending on what the camera inspection finds. Because so many Century City fireplaces sit idle, the most common issues we find are not creosote-related: they’re rusted exterior caps, cracked crowns from decades of sun exposure, damaged flashing where the chimney meets a roof or parapet, and clay-tile liners that have begun to spall. In condo buildings, a chimney repair usually has to be scoped, quoted, and scheduled around HOA or building management access rules, which is why our estimates include the access time, not just the repair time.

Hickory Chimney Sweep handles more than one kind of Chimney Repair in Century City, and we carry professional-grade materials from brands like Copperfield, DuraFlex, and HeatShield so we can resolve what the camera finds without handing you off to a third party.

Chimney Cap Installation

Signs you need it

You have an open flue with no cap, or a cap that’s rusted through, warped, or missing sections.

What it costs in Century City

A new chimney cap installation in Century City typically runs $185 – $475, depending on the flue size and whether a custom-fabricated cap is needed.

How we do it

We measure the flue opening, confirm the correct Copperfield or Gelco cap model, and install it with weatherproof fastening so Santa Ana wind and rain can’t work it loose.

Chimney Cap Replacement

Signs you need it

You already have a cap, but it’s corroded, the mesh is torn, or birds and debris are getting past it.

What it costs in Century City

Replacing a damaged cap in Century City generally costs $185 – $475, including removal of the old unit and installing the new one.

How we do it

We pull the old cap, check the flue opening for hidden damage, and fit a new cap sized to the flue, not a one-size-fits-all unit.

Chimney Liner Installation

Signs you need it

Your clay liner is cracked, spalling, or the camera inspection shows gaps between liner sections; this is also common when converting an old wood-burning flue to vent a gas insert.

What it costs in Century City

Chimney liner installation in Century City typically runs $1,500 – $3,200, depending on flue height, accessibility from the roof or roof hatch, and the liner material required.

How we do it

We install a DuraFlex flexible liner system sized to the appliance, insulated where Century City’s mild climate and intermittent use call for it, so the flue vents properly and meets current safety standards.

Chimney Flashing Repair

Signs you need it

Water stains on the ceiling near the chimney, peeling paint around the fireplace, or visible gaps and lifted flashing at the roofline.

What it costs in Century City

Flashing repair in Century City generally costs $300 – $850, depending on roof access and how much of the existing flashing needs to be cut out and replaced.

How we do it

We remove the failing flashing, inspect the roof-to-chimney junction, and install new step or counter flashing that actually sheds water in Southern California’s occasional heavy rain.

Chimney Crown Repair

Signs you need it

The concrete crown at the top of the chimney is cracked, spalled, or has visible gaps where water is getting in.

What it costs in Century City

Crown repair in Century City falls between $400 and $1,200, depending on damage extent and whether we can resurface or need to rebuild.

How we do it

We seal minor cracks with a flexible crown coat, or rebuild heavily damaged crowns with a proper concrete mix that slopes away from the flue so water drains off.

What Chimney Repair Costs in Century City

The main thing that pushes a Century City chimney repair toward the high end is access. A cap replacement on a two-story single-family home near Westwood takes an hour on the roof. The same job on a 20th-floor tower on Avenue of the Stars takes a freight elevator window, building-management coordination, and longer equipment haul times. We quote the real number up front, not a lowball that gets revised on the day of the job.

Do I really need a new liner, or can the old one be patched?

A camera inspection tells us whether a liner can be resurfaced or needs replacement. Minor cracks can sometimes be addressed with HeatShield resurfacing, but spalling clay tiles or separated sections usually mean a full DuraFlex liner install. We’ll show you the footage and recommend only what the flue actually needs.

Call (855) 554-2841 for an exact estimate on Century City chimney repair; we quote from the camera footage, not from guesswork.

What actually happens if I skip a chimney repair in Century City?

Skipping a cracked crown or damaged cap lets water into the flue, and that’s the start of liner deterioration. On a gas fireplace, a blocked or damaged flue means carbon monoxide isn’t venting the way it should, and on any fireplace, a damaged chimney is a fire-safety risk.

Call (855) 554-2841 and we’ll tell you plainly whether the repair can wait or should be scheduled now.

Brands We Service in Century City

We stock and install specified professional-trade material, not hardware-store generics. In Century City we work most often with Copperfield caps, DuraFlex flexible liners, and HeatShield resurfacing products, all of which we keep on hand for the standard flue sizes we see in 90067 condos and homes. That means most repairs don’t wait on special orders. Our brands page shows the full range, but the short version is this: if a certified chimney contractor in Southern California specifies it, we’re likely already using it.

Pricing for Chimney Company in Century City, CA

Neighborhoods We Serve in Century City

We work throughout the 90067 ZIP code and the surrounding edges where Century City blends into Westwood and Beverly Hills. Our normal response window in Century City is one to three business days, with many tower jobs scheduled around the building’s freight-elevator windows.

• Avenue of the Stars corridor and high-rise condominiums
• The Constellation Boulevard towers
• Condo buildings near Century Park East and West
• Low-rise and single-family edges toward Westwood
• Residential pockets near the Beverly Hills border

Service Area – Cities Near Century City

Hickory Chimney Sweep serves Century City from our base in South San Gabriel, and we schedule regularly across the neighboring Westside. If you’re in Beverly Hills, CA, Culver City, CA, West Hollywood, CA, or Venice, CA, we can usually include you in the same week’s routing. The chimney conditions change once you leave the tower district, but the service standard stays the same.

FAQs About Chimney Company in Century City