Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Studio City, CA
Chimney repair in Studio City usually means relining an original clay tile flue or replacing a rusted cap on a hillside home, and the work runs anywhere from $400 to $2,800 depending on what the camera inspection turns up. Hickory Chimney Sweep has served Studio City since 2013, and most of what we find up here traces back to two things: houses built between the 1920s and 1960s, and canyon weather that punishes every exposed masonry surface. Call (855) 554-2841 when you want a straight answer about what your chimney actually needs and what can wait.
Why Studio City Homes Are Different
Studio City splits into two very different chimney situations. South of Ventura Boulevard, the 1920s and 30s Spanish Revival homes and small ranch houses have original brick fireplaces with clay tile flues. After eighty or ninety years of seismic settling, those clay tiles develop hairline cracks that you will never see without a camera. North of Ventura, above the boulevard in the Dona Streets and around Fryman Canyon, the houses sit on slopes where canyon winds do things flatland chimneys never experience. Oak leaves and twigs get driven into flues and caps. Draft reverses when wind hits the hillside at the wrong angle. And because the lots are tight on the slope, many chimneys are taller than standard, which makes cap and crown condition that much more important.
The climate compounds all of it. Hot, dry summers and Santa Ana events put spark arrestors and screen condition at the top of the inspection list. Winters are mild enough that creosote builds slowly, which sounds like good news until you realize it means years of neglect pile up quietly. We regularly find flues in Studio City that have not been opened in a decade because the fireplace still “worked fine” every winter. A camera inspection is the only way to know what is actually in there.
Styles & brands we work with
Our Main Studio City Services
Most Studio City homeowners call us first about one of two things: a chimney that has never been swept or a dryer vent that has never been cleaned. Both are fire-safety work, and both tend to get ignored until something smells wrong.
Chimney Sweep in Studio City
A proper sweep here is not just brushing the flue. On hillside homes above Ventura Boulevard we typically pull oak leaves, twigs, and the occasional bird nest out of the cap area before we even start on the flue itself. Then it is removing creosote, checking the spark arrestor screen for tears, and looking at the cap, crown, and flashing while we are already on the roof. The dry climate and Santa Ana exposure make screen condition a bigger deal in Studio City than in most of Los Angeles. Chimney Sweep in Studio City covers the full scope of this service.
Dryer Vent Cleaning in Studio City
Dryer vents in older Studio City homes often run long horizontal stretches through crawl spaces or up through walls, which means lint accumulates faster and the vent is harder to reach. A clogged dryer vent is one of the leading causes of residential fires in the U.S., and it is the easiest one to prevent. On 91604 and 91614 homes we find vents that have never been opened since the house was built. Dryer Vent Cleaning in Studio City walks through what the job involves and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Studio City
Chimney repair in Studio City comes down to two common problems: cracked clay tile flues in the pre-1960s housing stock and rusted or missing caps on hillside chimneys exposed to canyon wind. We recommend a camera inspection before any repair so you can see the damage yourself, and we do not recommend work that can safely wait. Chimney Repair is our core service, and we handle everything from minor crown patching to full relining with DuraFlex flexible liner systems.
Chimney Liner Installation
Signs you need it
Hairline cracks in original clay tile flues, often found on 1920s-40s Spanish Revival homes south of Ventura Boulevard, let heat and gases reach the surrounding masonry and framing.
What it costs in Studio City
Expect $2,300 to $2,800 for a full liner installation in a standard Studio City chimney, including the camera inspection and materials.
How we do it
We run a camera through the existing flue, remove what is unsalvageable if needed, then install a DuraFlex flexible liner from top to bottom, reconnecting the appliance and testing draft before we leave.
Chimney Crown Repair
Signs you need it
A cracked or spalling crown lets water into the masonry, which shows up as water stains on the ceiling near the fireplace or crumbling mortar on the chimney chase.
What it costs in Studio City
Budget $700 to $950 for a crown removal, replacement, and proper cure time, which is the only fix that stops water intrusion permanently.
How we do it
We remove the damaged crown, build a form that creates proper slope away from the flue, pour a new crown, and let it cure before exposing it to weather.
What Chimney Repair Costs in Studio City
| Item | Typical range in Studio City |
|---|---|
| Chimney cap replacement | $245 – $330 |
| Crown repair | $700 – $950 |
| Liner installation (DuraFlex) | $2,300 – $2,800 |
Do I really need a new liner, or can it wait?
If the camera shows cracks, do not wait. Cracked clay tile flues on older Studio City homes let heat reach framing and masonry, and the fix only gets more expensive when water damage and creosote staining spread.
How long does a chimney repair take in Studio City?
Cap replacements are usually done in a single visit. Crown work needs a day plus cure time. Full relining generally takes one to two days depending on access. Call (855) 554-2841 for a real timeline based on your chimney.
Brands We Service in Studio City
We work with the same professional-trade brands certified chimney contractors specify: DuraFlex for flexible liner systems, HeatShield for resurfacing damaged flues, and Copperfield caps and chase covers. Most common cap sizes are stocked locally, which means a simple replacement can often be completed in one visit. Our our brands page shows the full roster and why we do not source from hardware stores.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Studio City, CA
| Service | Typical range in Studio City |
|---|---|
| Chimney sweep (standard fireplace) | $179 – $250 |
| Chimney sweep (with gas insert) | $200 – $280 |
| Dryer vent cleaning | $95 – $145 |
| Chimney cap replacement | $245 – $330 |
| Crown repair | $700 – $950 |
| Liner installation (DuraFlex) | $2,300 – $2,800 |
Prices in Studio City push toward the higher end when roof access is difficult, particularly on hillside lots above Ventura Boulevard where ladders need leveling pads and extra safety setup. The flue length and the amount of creosote or debris removal also move the number.
You get the price before we start, not after. We do flat-price sweeps and send you a camera report with photos so you can see exactly what we found and why any repair is being recommended.
Neighborhoods We Serve in Studio City
We cover the full Studio City area from the flats south of Ventura Boulevard up through the hills. Most of our calls come from the 91604 zip, with 91614 homes mixed in throughout the same service routes.
- Dona Streets
- Fryman Canyon
- Silver Triangle
- Carpenter Square
Our typical response time for Studio City jobs is one to three business days from your call, depending on how the week is scheduled.
Service Area – Cities Near Studio City
Hickory Chimney Sweep works throughout Studio City and the surrounding San Fernando Valley and Los Angeles communities. We regularly run sweeps and inspections in North Hollywood, CA, Universal City, CA, Sherman Oaks, CA, and West Hollywood, CA. If your chimney is inside one of these areas, the same camera-first process and flat-price policy apply.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Studio City
Most Studio City appointments are scheduled within one to three business days. Hillside access does not slow us down, but we do plan roof work around wind, since Santa Ana gusts make ladder work unsafe and we will not compromise on that.
Most cleaning and cap or crown repairs do not require a permit. Full relining or significant masonry reconstruction can trigger permit requirements, but that depends on the scope. Call (855) 554-2841 and we will tell you what applies to your specific chimney.
Yes, and we do it often in Studio City. One call covers both, and that is the fastest way to knock out the two most common fire hazards in the house during a single appointment window.
Hickory Chimney Sweep performs chimney cleaning, repair, and dryer vent work in Studio City, CA. Call (855) 554-2841 for a free estimate and a camera-backed inspection before you burn again.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Studio City Customers Say
"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."
— Luis Castillo"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carlos Rodriguez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Leela Reddy