Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Los Angeles
Dryer vent cleaning in Los Angeles typically runs $149 – $289 for a standard single-family home, and we can usually get to your block within 2 – 4 business days. If you live in the older bungalow and Spanish Colonial neighborhoods around 90004, 90006, or 90008, you’re dealing with a venting setup most national chains don’t understand – and that’s exactly what we’re built for. Ruben Acosta leads our team, and we’ve worked enough tight-street rooflines and stucco parapets across this city to know where lint hides and why a dryer that suddenly takes two cycles is rarely just a filter problem. Call (855) 554-2841 and we’ll tell you straight whether your vent needs a cleaning, a termination fix, or nothing at all.

Why Hickory Chimney Sweep Is Los Angeles’s Preferred Dryer Vent Cleaning Company
We built Hickory Chimney Sweep as a fire-safety company first, not a single-service vendor. That’s why our Dryer Vent Cleaning team handles the laundry-room side of the same fire-risk equation we address in chimneys. In Los Angeles, the two problems overlap more than people expect: old masonry stacks, shared walls, and decades of deferred maintenance. We know what to look for because we’re already looking at the same structural systems from the chimney side.
Our base is in East Los Angeles, which means we’re not driving in from Ventura or the Inland Empire when something’s wrong. Koreatown, Echo Park, Silver Lake, and Hollywood are all inside our regular service loop. That matters when a vent termination needs a second look and you don’t want to wait two weeks for a callback. We’re not a dispatcher network – Ruben Acosta runs the crew directly, and the person who quotes the work is the person who knows what the inside of a 1930s hollow-clay-tile stack looks like after ninety years of seismic settling.
We carry professional-grade vent components from manufacturers like Gelco and Famco because the stuff on big-box shelves doesn’t hold up on a 1928 Craftsman with a roof pitch that eats hardware. When a termination cap fails, we replace it with a cap built to keep birds, rain, and embers out while letting lint-loaded air move freely. That’s the kind of decision you can’t fake from a call center.
Styles & brands we work with





Our Dryer Vent Cleaning Services in Los Angeles
Dryer Vent Cleaning and Lint Removal
This is the core job: we clear the entire run from the dryer transition to the outside termination, removing the lint that reduces airflow, forces the dryer to run hotter, and creates the conditions for a dryer fire. In Los Angeles’s mild climate, dryers often see lighter use than in colder regions, but that doesn’t mean the lint stops accumulating. Long dry seasons break down lint into fine, highly flammable dust that packs into every bend. We use a rotary brush system sized to your vent’s actual diameter, not a one-size-fits-all wand, because the 3-inch runs common in 1950s stucco homes need different tooling than a modern 4-inch metal duct.

Dryer Vent Termination and Cap Inspection
Most Los Angeles homes have roof terminations, not wall terminations, and that creates a problem: nobody sees the cap. Around the core ZIPs of 90005 through 90008, caps hide behind parapets, chimney shoulders, and the tight rooflines of Spanish Colonial Revival homes. Santa Ana wind events drive leaves, twigs, and trash into open or broken caps, and once debris gets past the damper, it’s packing lint into a blockage. We inspect the termination from the roof, replace compromised caps with Gelco or Famco hardware, and make sure the damper actually closes when the dryer isn’t running so outside air and pests can’t back into the duct.

Shared-Stack and Adjacent-Flue Inspection
This is where Los Angeles is genuinely different from almost any other city in the country. In the dense core ZIPs from 90001 to 90008, dryers in 1920s-40s bungalows and attached Spanish Colonial properties frequently vent into shared or adjacent masonry stacks alongside a neighbor’s abandoned flue. Because the region’s mild climate means most fireplaces sit idle for years, lint and heat exhaust can migrate into a stack no one thinks to check – creating a fire load inside a chimney that hasn’t been swept since the gas-log conversion. We trace the vent path, identify cross-contamination points, and isolate the dryer exhaust so it terminates outside instead of bleeding into a dead flue. Very few dryer-vent companies in Los Angeles even look for this, because it requires understanding chimney construction and dryer venting at the same time.

Vent Run Repair and Reconfiguration
Older Los Angeles homes often have dryer vents that were installed badly decades ago: corrugated foil flex runs, runs longer than 35 feet, multiple sharp 90-degree elbows, or venting that terminates inside an attic or crawlspace. Those installs were wrong then and they’re dangerous now. We replace failed runs with rigid metal duct, shorten runs where the layout allows, and when a long run is unavoidable, we add a booster where the dryer’s blower can’t do the job alone. In stacked laundry closets common to mid-century stucco houses, we rebuild transitions with heat-rated components instead of the sagging plastic that melts and collapses.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
We don’t stock hardware-store generics. Our dryer vent work relies on components from Gelco, Famco, and Olympia Chimney – the same termination caps, dampers, and venting hardware specified by professional chimney and venting contractors. That matters in Los Angeles because the sun, smog, and salt-tinged marine air from the coast eat cheap galvanized parts fast. A Famco cap with a louvered damper and heavy-gauge housing will still be closing properly after five Santa Ana seasons. A zinc-plated cap from a consumer retailer will be rusted open by year two. We carry these parts on the truck so a straightforward cap replacement happens on the first visit, not after a second trip.
Common Dryer Vent Cleaning Problems We See in Los Angeles Homes
- Dryer exhaust tied into shared masonry stacks. This is routine in the 1920s-40s attached bungalows of 90004, 90006, and 90007. Lint and heat bleed into a neighbor’s abandoned flue that no one inspects because no one burns wood anymore. We isolate those runs and add outside termination.
- Clogged or missing roof termination caps hidden behind parapets. The stucco-clad mid-century houses across the core ZIPs often have roof terminations you can’t see from the street. Years of wind-driven debris collect behind failed caps until the entire outlet is blocked.
- Long, crushed, or foil-flex vent runs behind stacked laundry. Mid-century homes with stacked washer-dryer closets often have dryer vents that run 15-25 feet through a wall chase with multiple bends. Foil flex crushes behind the appliance, and the shallow draft masks lint buildup until the dryer’s thermal fuse starts tripping.
- Bird nests and pest debris in open terminations. Los Angeles’s dry, warm climate makes a roof vent an attractive nesting site. Pigeons, starlings, and roof rats all find their way into uncapped ducts, and the nest combined with dryer lint creates a dense, flammable plug.
Pricing for Dryer Vent Cleaning in Los Angeles, CA
For most single-family homes in Los Angeles, a standard dryer vent cleaning runs $149 – $289. That covers the full run from dryer transition to outside termination, rooftop or wall access, and a written condition report. Homes with longer runs, multiple bends, or a second-floor laundry add $40 – $90. If we find a failed cap or crushed transition, we’ll quote the part separately so you know the cleaning price and the repair price before we start anything. Shared-stack and adjacent-flue inspections are quoted as a site-specific price, because the scope changes with roof access and the condition of the masonry. Every quote is free, and you’ll get it before we touch the vent. Call (855) 554-2841 for a fixed quote.

See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Los Angeles
Our East Los Angeles crew covers the surrounding neighborhoods as part of our regular service loop. That includes Koreatown with its dense pre-war apartment stock, Echo Park and Silver Lake on the hillside bungalow blocks, and Hollywood‘s older courtyard complexes. If you’re in one of those neighborhoods and wondering whether we’ll cross town for a single vent, the answer is yes – we’re local to the whole basin, not just one corner of it. Dryer Vent Cleaning in Los Angeles is the core of what we do, and these neighborhoods are part of that service area.
Serving Los Angeles, CA — Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Los Angeles
For a standard single-family home in Los Angeles, expect to pay $149 – $289, with longer or more complex runs adding another $40 – $90. Roof access, shared-stack inspection, and cap replacement are separate line items quoted before work begins. Call (855) 554-2841 and we’ll give you a fixed number, not a range that changes on arrival.
Most Los Angeles households should clean their dryer vent every 12 – 18 months, even if the dryer sees light use. The long dry season breaks down lint into fine dust, and wind-driven debris from Santa Ana events collects behind roof caps regardless of how often you dry clothes. If your dryer takes two cycles to finish a load or the laundry room feels warm and smells like exhaust, schedule earlier.
Yes – this is one of the main reasons we get called in the core ZIPs around 90004 and 90006. Dryer exhaust tied into shared or adjacent masonry stacks is a fire hazard that most dryer-vent companies don’t even look for. We trace the full run, identify where lint and heat can migrate into a neighbor’s idle flue, and isolate the termination so the two stacks stay separate.
We install and service termination caps, dampers, and vent hardware from Gelco, Famco, and Olympia Chimney, along with HeatShield and DuraFlex systems when vent work intersects with chimney repair. These are the same professional-trade brands specified for commercial and code-compliant residential work. We don’t install consumer-grade hardware-store components because they fail too quickly in Los Angeles’s sun and marine air.
Yes. In fact, a pre-purchase vent inspection is one of the smartest small checks you can run on a 1920s-40s bungalow or Spanish Colonial. Many of these homes have original venting that was never brought to modern code, and a shared-stack termination or a foil-flex run hidden behind a wall can be a multi-thousand-dollar fix – or a fire – waiting for the next owner. We’ll document what we find and give you an honest read on whether anything needs to change before you close.
One Local Insight Worth Reading
Here’s what almost no generic dryer-vent page tells Los Angeles homeowners. In this city’s dense core ZIPs – think the blocks around 90004, 90006, 90007, and 90008 – dryers in bungalows, Spanish Colonials, and stucco-clad mid-centuries frequently vent into shared or adjacent masonry stacks alongside a neighbor’s appliance. And because the region’s mild climate means most flues sit idle for years – decorative fireplaces used a handful of nights a season – lint and heat exhaust can migrate into a stack no one thinks to check. That shared-stack geometry is rare in newer suburban metros. In 90001 through 90008, it’s routine. We’ve seen it enough that a shared-stack or adjacent-flue inspection is a standard part of every dryer vent job we run in these neighborhoods, not an add-on.
On a bungalow block in 90004, a customer called after their dryer started taking two cycles to finish a load and the laundry room smelled faintly of exhaust. We found a crushed foil-flex transition behind the dryer feeding a long run that terminated inside a shared masonry stack next to the neighbor’s abandoned flue. It was packed with lint and a starling nest. We cleared the run, re-secured the transition with a proper heat-rated connection, and added an outside termination so the two stacks stayed isolated. The dryer finished a load in one cycle, and the neighbor’s flue stopped filling with someone else’s lint.
Call Hickory Chimney Sweep for Dryer Vent Cleaning in Los Angeles
If your dryer is running long, your laundry room smells like exhaust, or you simply haven’t had the vent looked at in a few years, call us. We answer specific questions with specific answers – no upselling, no invented problems, no recommending work you don’t need. Ruben Acosta and the Hickory team serve Los Angeles with the same fire-safety lens we bring to every chimney, because a clogged dryer vent and a neglected flue are the same problem wearing different clothes. Call (855) 554-2841 for a free estimate, or schedule online and we’ll call you back within one business day.
Written by Ruben Acosta, Owner at Hickory Chimney Sweep, serving Los Angeles and the surrounding neighborhoods from East Los Angeles.