Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Pico Rivera, CA
Chimney repair in Pico Rivera usually means working on a masonry fireplace that was built when Eisenhower was president. Most of the housing stock in the 90660, 90661, and 90662 ZIP codes went up between 1940 and 1965, and the original clay flue tiles in those chimneys are now 60 to 80 years old. Cracked liners, spalling brick, and crowns that have weathered too many dry summers are what we handle most. If you need a sweep, repair, or dryer vent service, call Hickory Chimney Sweep at (855) 554-2841.
Why Pico Rivera Homes Are Different
Pico Rivera is a post-WWII tract-home city. The overwhelming majority of houses are single-story stucco built for returning GIs and the families who followed the auto and refinery jobs in the 1940s through the mid-1960s. That means something very specific for chimney work: almost no new-construction chimney stock. What we see are original masonry fireplaces with clay tile liners that are well past their expected service life. The climate compounds the problem. Pico Rivera sits in the LA basin with a warm, dry Mediterranean pattern. Fireplaces get light seasonal use, mostly cool winter evenings. Creosote builds slowly but it builds for decades, often hardening into a glazed layer that basic brushing will not remove. The long dry spells mean soot, bird nests, and debris sit untouched for years at a time. Every job here starts with the assumption that the flue has not been looked at in a very long time.
Styles & brands we work with
Our Main Pico Rivera Services
Two calls dominate our schedule in Pico Rivera: annual chimney sweeping for homes with original masonry fireplaces, and dryer vent cleaning for the same houses where the laundry room vent has never been opened since the house was built.
Chimney Sweep in Pico Rivera
A sweep in Pico Rivera is rarely a quick job. Homes here have 60-plus-year-old fireplaces, often with clay tile liners showing cracks or separation. We remove the creosote, check the flue with a camera, and document what we find. If the fireplace was sealed or painted over during an old remodel and recently reopened, we often uncover a flue that was never cleaned before. Get the full details on our Chimney Sweep in Pico Rivera page.
Dryer Vent Cleaning in Pico Rivera
Most Pico Rivera laundry rooms vent through a short run to the side of the house, but that run has usually been collecting lint since the Reagan administration. A clogged dryer vent is a leading cause of residential fires, and it also makes your dryer run longer and hotter. We pull the built-up lint, check the termination for blockages, and confirm the vent is moving air properly. Learn more on our Dryer Vent Cleaning in Pico Rivera page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Pico Rivera
Chimney repair in Pico Rivera almost always starts with the same discovery: the clay flue tile inside a 1950s or 1960s masonry chimney has cracked after decades of heating and cooling cycles, and the homeowner had no idea. The dry LA basin climate does not cause the cracks, but it does keep them from being noticed, since there is no freeze-thaw pressure to worsen them quickly. What it does mean is that a small crack can sit for years while the fireplace is used seasonally, and by the time we find it, the tile is often beyond patching. That is why we stock professional-grade repair materials from brands like HeatShield and DuraFlex, and why we handle the repair ourselves instead of referring it out. You can read more about our full approach on the Chimney Repair page.
Chimney Cap Installation
Signs you need it
You can hear birds or animals inside the flue, you see water streaking down the brick face after rain, or the existing cap is rusted through and leaning.
What it costs in Pico Rivera
Chimney cap installation in Pico Rivera typically runs $180 to $340 including the cap and the work to secure it to the flue tile.
How we do it
We measure the flue opening, select a properly sized cap from brands like Famco or Copperfield, and anchor it to the flue tile with a mechanical fastening system that resists wind and animal intrusion.
Chimney Cap Replacement
Signs you need it
The cap is rusted, the mesh screen is torn or missing, or the cap has blown off entirely and you can see daylight at the top of the flue.
What it costs in Pico Rivera
Chimney cap replacement in Pico Rivera is typically $190 to $350, depending on whether the old cap must be cut off or the flue tile is still intact enough to accept a new mount.
How we do it
We remove the old cap, inspect the top of the flue tile for damage, and install a new cap sized to the existing flue with a replacement mounting assembly that will not loosen.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked or separated clay tile, you have smoke backing up into the room, or there is visible flue tile debris at the bottom of the chimney.
What it costs in Pico Rivera
Chimney liner installation in Pico Rivera runs $1,800 to $6,500 depending on the flue height, the liner diameter, and whether an insulation wrap is required for the appliance you are venting.
How we do it
We clean the flue, run a camera inspection to confirm the dimensions, then install a DuraFlex flexible liner system that meets the clearance and sizing requirements for your fireplace or stove.
Chimney Flashing Repair
Signs you need it
You have water stains on the ceiling near the fireplace, damp drywall around the chimney chase, or you can see lifted or missing flashing at the roofline.
What it costs in Pico Rivera
Chimney flashing repair in Pico Rivera is typically $320 to $700 depending on how much of the existing flashing must be cut back and how much new metal must be formed.
How we do it
We remove the old flashing, inspect the masonry underneath for damage, and install new step and counter flashing that sheds water correctly and seals against the chimney face.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of the chimney is cracked, spalling, or missing in sections, and you see water damage or efflorescence running down the brick below it.
What it costs in Pico Rivera
Chimney crown repair in Pico Rivera runs $450 to $1,100 depending on whether we can resurface the existing crown or must build a new form and pour it from scratch.
How we do it
We remove the deteriorated crown material, check the flue tile and brick underneath, and rebuild the crown with a proper slope and drip edge so water stops pooling and soaking into the masonry.
What Chimney Repair Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $190 – $350 |
| Chimney flashing repair | $320 – $700 |
| Chimney crown repair | $450 – $1,100 |
| Chimney liner installation | $1,800 – $6,500 |
Do I really need a new chimney liner in Pico Rivera, or can it wait?
If the camera inspection shows cracked clay tile or gaps between tile sections, the liner has already failed, and no amount of waiting will fix it. A damaged liner allows heat and gases to reach the masonry around the flue, and that is how chimney fires start. Call (855) 554-2841 for an inspection that shows you exactly what we see.
How do I know the repair quote in Pico Rivera is honest?
We show you camera footage of every problem we recommend repairing, and we explain what can wait and what cannot. You get a flat price before any work begins, and no recommendations are made without evidence you can look at. Call (855) 554-2841 for an exact quote.
Brands We Service in Pico Rivera
We install and repair products from DuraFlex, HeatShield, Famco, and Copperfield, the same manufacturers specified by certified chimney contractors. Common parts like caps, termination kits, and liner components are stocked in our service vehicles, so most repair work in Pico Rivera is completed in one visit. See our brands for more on what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Chimney sweep (cleaning) | $180 – $340 |
| Dryer vent cleaning | $120 – $260 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $190 – $350 |
| Chimney flashing repair | $320 – $700 |
| Chimney crown repair | $450 – $1,100 |
| Chimney liner installation | $1,800 – $6,500 |
| HeatShield resurfacing | $650 – $1,200 |
In Pico Rivera, the biggest price driver is liner condition. Homes with original clay tile flue liners that have cracked after 60-plus years of seasonal use will need a liner rather than a simple sweep, and that is a step up in cost. Every quote we give is a flat price agreed to before work starts, and it includes a camera inspection with a photo report so you can see exactly what you are paying for.
Neighborhoods We Serve in Pico Rivera
We work throughout Pico Rivera, from the older tracts off Whittier Boulevard up to the neighborhoods near the San Gabriel River. Most of our calls come from the original 1940s and 1950s subdivisions, where the fireplaces have never been relined and the dryer vents are still original.
- Downey Road corridor
- Whittier Boulevard tracts
- Passons Boulevard area
- San Gabriel River neighborhoods
- Rosemead Boulevard corridor
Response time across Pico Rivera is typically 1 to 3 business days, depending on the season. We keep extra capacity during the fall months because that is when Pico Rivera homeowners start using their fireplaces again.
Service Area – Cities Near Pico Rivera
Hickory Chimney Sweep serves Pico Rivera and the surrounding communities in the San Gabriel Valley and Southeast Los Angeles. We also work in West Whittier-Los Nietos, CA, Montebello, CA, Santa Fe Springs, CA, and Bell Gardens, CA.
Serving Pico Rivera, CA — Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Pico Rivera
Routine chimney sweeping and dryer vent cleaning do not require a permit. For liner replacement or structural repair on a Pico Rivera home, the answer depends on the scope, and we can tell you what applies to your specific address when we inspect. Call (855) 554-2841 and we will walk you through it.
Yes. Most Pico Rivera homeowners book both services in the same visit, since the chimney and the dryer vent are the two biggest fire-safety items in the house and both have been neglected for years. One call covers both at (855) 554-2841.
For a pre-winter sweep, book in September or October. Pico Rivera has a concentrated seasonal rush once the evenings turn cool, and the same is true for dryer vent cleaning as fall laundry loads increase. Call (855) 554-2841 to schedule either service, and estimates are free.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pico Rivera Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Leela Reddy"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Dustin Hoffman"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Dina Najjar