Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Silver Lake
If you own a home in Silver Lake, your chimney likely wasn’t built for the way you use it now. Most of the neighborhood’s 1920s and 1930s Spanish Colonial Revival and English Tudor homes still carry their original clay flue tiles, and those tiles crack. We’re out here on the hillsides above the reservoir enough to know the pattern. A chimney sweep in Silver Lake costs between $189 and $319 for a standard cleaning with a Level 1 inspection, and we can usually get to you within a few days. Call (855) 554-2841 to schedule.

Why Hickory Chimney Sweep Is Silver Lake’s Preferred Chimney Sweep Company
Ruben Acosta founded Hickory Chimney Sweep to fix the problem Silver Lake homeowners complain about most: being told a chimney needs thousands in work with no way to verify it. Our standard changes that. Every sweep includes a camera inspection we show you on a monitor, not a verbal summary you have to take on faith. When we say a flue tile is cracked, you see the crack. That matters here more than most places, because these hillside chimneys hide problems well.
Silver Lake’s streets take time to learn. The hairpin turns above the reservoir, the steep driveways off Silver Lake Boulevard, the narrow alleys behind Hyperion. Our techs know which stucco chimneys vent properly and which ones pull smoke back into the living room on a windy January night. We stock parts for the brands common in this neighborhood, so a rusted Famco cap or a missing spark arrestor doesn’t mean waiting a week for a second visit.
Styles & brands we work with





Gas Fireplace Cleaning in Silver Lake
Gas fireplace cleaning in Silver Lake is more involved than popping out the glass and wiping it down. Most gas inserts here vent through chimneys built for wood. The flue is oversized for the appliance, the draft is weak, and soot accumulates on the glass and logs faster than a modern direct-vent unit would. We remove the logs and burner, clean the glass with a ceramic-safe cleaner, vacuum the firebox, and check the vent run with a camera. Expect to pay $150 to $225 for a standard gas fireplace cleaning in the 90026 zip code.
Soot and Glass Buildup
Older gas units in Silver Lake bungalows produce soot when the air-to-fuel mix drifts rich. That soot film on the glass isn’t just cosmetic. It often means the unit is running dirty and the vent isn’t pulling correctly. We clean the glass with a non-abrasive ceramic cleaner so it doesn’t etch over time.
Venting and Draft Check
If you’ve noticed the fireplace smells stale or the flame flickers oddly, the vent run is usually the culprit. We run a camera up the flue to confirm the liner isn’t blocked with soot or animal debris. Silver Lake’s mature trees drop material onto caps and into open flues more than you’d think.
Chimney Maintenance in Silver Lake
Chimney maintenance in Silver Lake starts with understanding that this neighborhood sits in a Very High Fire Hazard Severity Zone. That changes the stakes. A chimney full of creosote isn’t just a winter-heating problem here. It’s a fire-risk liability that gets worse every dry Santa Ana season. Annual maintenance, including a sweep and a Level 1 inspection, runs $189 to $319. A Level 2 camera inspection as a standalone service runs $250 to $400 and is what we recommend before buying any home with an original chimney.
Annual Sweep and Inspection
Wood-burning fireplaces in Silver Lake should be swept every year or roughly every cord of wood burned, whichever comes first. The sweep removes creosote and soot. The inspection checks the cap, crown, flue tiles, damper, and smoke chamber. Combined, they’re the cheapest fire insurance you can buy in 90026.
Creosote Management in a Fire Zone
Creosote builds in stages. First-degree is flaky and brushes off. Third-degree is glazed, tar-like, and combustible at lower temperatures. Homes in the Silver Lake hills often haven’t been swept in years because the fireplace is more decorative than functional, and that’s exactly when third-degree creosote forms. We remove what’s safe to remove and tell you plainly if the flue needs chemical treatment before standard brushes will work.

Trusted Brands We Service in Silver Lake
We don’t guess at parts. We install and service HeatShield resurfacing systems for flue liners that can be saved, and we use Copperfield and Olympia Chimney components where caps, dampers, and connector hardware need replacing. Silver Lake homeowners don’t want hardware-store generics on a 90-year-old chimney, and we agree. When a part is needed, we carry the common sizes for the stucco chimneys we see here, which usually means we can finish the repair in one trip instead of two. One call covers both the chimney and your dryer vent, by the way.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Silver Lake Homes
- Hairline cracking in original clay flue tiles. These 1920s to 1940s chimneys were built before modern seismic codes, and decades of ground settling along the Silver Lake hillsides have left tiles with fractures that let heat and creosote reach surrounding framing. The cracks are invisible without a camera inspection, which is why we never skip one here.
- Missing or rusted spark arrestors on tall exterior chimneys. Many homes above the reservoir have chimneys that rise 10 to 15 feet above the roofline. A missing spark arrestor sends embers onto your roof and into your neighbor’s yard, and in a Very High Fire Hazard Severity Zone, that’s exactly what inspectors look for before Santa Ana season.
- Gas appliances venting into chimneys built for wood. A 1930s flue sized for a wood-burning fireplace is too large for a modern gas insert. The result is weak draft, soot buildup, and occasional carbon monoxide spillback. A Level 2 inspection shows the actual vent configuration and confirms whether the setup is safe.
- Deteriorated mortar joints in the smoke chamber. The smoke chamber sits between the firebox and the flue, and in older Silver Lake houses it was often built with corbeled brick and a rough mortar coat. That mortar breaks down, creosote accumulates in the gaps, and heat transfers sideways into the wall. Parging the chamber smooth is a standard repair we perform in-house.
Pricing for Chimney Sweep in Silver Lake, CA
Silver Lake pricing tracks the age and condition of its housing stock, not just the labor. A standard chimney sweep with a Level 1 inspection runs $189 to $319. Gas fireplace cleaning runs $150 to $225. A Level 2 camera inspection alone is $250 to $400. If we find cracked tiles or a deteriorated flue liner, HeatShield resurfacing typically runs $1,800 to $4,500 depending on flue length and access, and a full DuraFlex reline generally falls between $3,500 and $7,000. The camera footage is yours to keep, and you decide what gets done after seeing it. Call (855) 554-2841 for a free estimate. No charge to look.
We Also Serve Cities Near Silver Lake
Our Silver Lake routes put us in Echo Park, Koreatown, Hollywood, and downtown Los Angeles every week. If you’re searching for a Chimney Sweep who works across the Eastside, that’s us. We know the difference between a 1920s stucco chimney in Silver Lake and a 1960s hillside rebuild in Echo Park, and we treat each one accordingly. Silver Lake remains our core service area, with 90026 fully covered.
Serving Silver Lake, CA — Our Local Coverage Area
We’re based in the Silver Lake area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Silver Lake
Not necessarily. Hairline cracks in clay tiles are common in Silver Lake’s Spanish Revival and Tudor homes, but not every crack demands a full reline. We run a Level 2 camera inspection and show you the footage. If the cracks are isolated and the surrounding mortar is sound, we can often parge the smoke chamber, apply HeatShield resurfacing to the damaged section, and leave the rest of the liner intact. A full DuraFlex reline is what we recommend only when the camera shows widespread tile failure or missing sections. You see what we see, and you make the call. Call (855) 554-2841 to schedule an inspection.
Silver Lake sits in a Very High Fire Hazard Severity Zone, which means a creosote-loaded chimney is a liability during Santa Ana wind season, not just during winter heating months. Cold-weather cities deal with freeze-thaw damage to masonry, but Silver Lake’s chimneys fail from seismic settling and long dry summers that bake mortar and loosen joints. The inspection calendar here is built around fall, before the winds pick up and embers start traveling. That’s the risk a Boston or Minneapolis chimney sweep doesn’t have to plan around.
First-degree creosote is flaky and brown, and it brushes off with standard sweep tools. Second-degree looks like crunchy granules. Third-degree is glazed, black, and hard, and it’s combustible at lower temperatures, which makes it a serious fire concern in a wood-burning chimney. You can’t reliably judge the stage from a glance up the firebox. A camera inspection shows the actual deposits, and that’s the only way we’ll quote a sweep or a chemical treatment. Call (855) 554-2841 and we’ll show you exactly what’s in your flue.
It depends on the flue size and whether a proper liner was installed. The original clay flue in a 1930s Silver Lake chimney was sized for wood smoke volume, and a gas insert produces less heat and less draft. That can cause condensation, soot accumulation, and carbon monoxide spillback into the living space. We camera the full vent run during a gas fireplace cleaning and tell you plainly if the setup is safe, if it needs a smaller-diameter liner, or if it’s fine as-is. You’ll see the footage. Nothing is recommended you can’t verify.
A standard chimney sweep in Silver Lake includes brushing the full flue length, removing creosote and soot from the smoke chamber and firebox, checking the damper function, and performing a Level 1 inspection of all accessible components. We also camera the flue, which is not standard with every sweep company, and we show you the footage before we leave. If you’re in Silver Lake, we’ll check the spark arrestor and exterior crown while we’re on the roof, because those are the points fire inspectors flag most often in this fire zone. Call (855) 554-2841 for current availability.
Written by Ruben Acosta, Owner at Hickory Chimney Sweep, serving Silver Lake and the greater East Los Angeles area.