Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Universal City
Dryer vent cleaning in Universal City typically runs $149 – $289 for a standard residential or commercial vent run, and most jobs are completed within 60 – 90 minutes. The 91608 ZIP sits tight against the Hollywood Hills at the south edge of the San Fernando Valley, so we schedule calls around hillside access and property operating hours, not a generic service window. If you’re calling from the resort corridor near Universal Studios Hollywood, CityWalk, or the hillside roads above Lankershim, call (855) 554-2841 and we’ll give you an honest time-to-arrival that matches how this district actually functions.

Hickory Chimney Sweep handles Dryer Vent Cleaning for both residential units and the hospitality-adjacent structures that define this district. We know the 91608 rhythm: a venue closes late, the crew slot opens before the next morning’s service, and the vent work gets done in that window. That’s not something a generalist crew from across the Valley can promise.
Key Takeaways:
- Dryer vent cleaning in Universal City costs $149 – $289 for a standard job.
- Most Universal City calls are completed in 60 – 90 minutes, even in the resort corridor.
- We work around park, studio, restaurant, and hillside property access hours.
- Free estimates by phone: (855) 554-2841.
Why Hickory Chimney Sweep Is Universal City’s Preferred Dryer Vent Cleaning Company
Our crews know that Universal City is not a typical residential neighborhood. The 91608 ZIP is a themed-entertainment and studio corridor: Universal Studios Hollywood, CityWalk, the hotels and restaurants that line the hillside above the 101, and the backlot-adjacent structures that stay active long after normal business hours. That means everything about our scheduling has to account for service windows between venue operations, parking barriers at certain properties, and the reality that a “morning appointment” here often means 6:00 a.m., not 9:00 a.m.
Ruben Acosta, who runs Hickory Chimney Sweep, trains every tech on this district’s operating rhythm. When a dryer vent at a hillside restaurant or a condo stack near the studio complex backs up, we’re not guessing how long it’ll take to get there. We know the access roads, the property managers who control gate entry, and which structures share vent stacks. That’s why Universal City property managers and homeowners in the residential pockets of 91608 keep our number close.
We’re licensed and insured, and we carry the same professional-grade products on the truck that we’d use on a chimney job: DuraFlex liner components, Gelco termination caps, and Olympia Chimney parts sized for common vent terminations. When a dryer vent problem turns out to be a shared-stack or roof-termination issue, we can usually address it on the spot rather than writing up a referral for someone else.
Styles & brands we work with





Our Dryer Vent Cleaning Services in Universal City
Dryer Vent Cleaning
Lint buildup is the point of this service, and in Universal City it’s a year-round problem because the long dry stretch between rains keeps lint and fine dust drifting into exterior terminations. We run brushes and high-CFM air through the full duct run from dryer to exterior cap, clean the lint trap housing, and verify that airflow at the termination point is actually moving. If your home or building sits on a hillside with a long vertical vent rise, we check the entire run, not just the first few feet.

Dryer Vent Cap and Termination Clearing
The hillside homes and resort-adjacent structures in 91608 collect leaf litter, dust, and wind-blown brush around exterior vent caps. In some cases we find the cap completely covered by accumulated debris, which forces hot moist air back into the structure or pushes lint into the wall cavity. We clear exterior terminations, inspect the flapper mechanism, and replace damaged caps with Gelco or Olympia Chimney parts when needed.

Dryer Vent Rerouting and Correction
Older condo buildings and converted hospitality units in Universal City often have dryer vents that take long, inefficient paths through interior walls before they exit. A run with multiple bends or a length push of 35 feet and then some traps lint faster and reduces dryer efficiency. We identify sections that need correction, make the change, and test airflow after the work. For structures where a full reroute isn’t feasible without opening walls, we’ll tell you plainly and give you the cost trade-off before any work begins.

Dryer Vent Inspection and Camera Review
Universal City property managers often ask for documentation before approving vent work in leased units. We run a small camera through the duct run and provide a photo report showing exactly what the obstruction looks like, where it sits, and what the vent looks like after cleaning. When you’re managing multiple units in a resort or condo setting, that documentation saves time with tenants, owners, and insurance paperwork. Nothing gets recommended that we can’t show you on camera.

We also extend our fire-safety scope to something most vent-only contractors here won’t touch: if your Universal City building has both a dryer vent and a wood or gas fireplace, one call covers both. You don’t need two separate vendors and two separate service windows in a district where time slots are already tight.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Universal City
We stock and install professional-trade materials, not consumer hardware-store generics. When a Universal City property needs a new vent termination, a cap replacement, or a liner section swapped, we work with DuraFlex, Gelco, and Olympia Chimney parts, the same suppliers specified by certified chimney and vent professionals. If you own a hillside home in 91608 with an exterior cap that’s been chewed through by wind and dry brush, we can replace it on the same visit. If a factory-built fireplace chase in the studio corridor needs a cap reset or a liner component, we carry those too. For Universal City properties with both chimney and dryer vent systems, one call covers both fire-safety checklists, and we schedule them together so you’re not releasing two separate vendors onto the property.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Universal City Homes
- Hillside leaf litter and wind-blown dust packing the exterior cap: The long dry stretch between rains pushes leaves, brush, and fine dust into vent terminations along the hillside. By the time most people look, the cap is half-blocked and airflow at the dryer is already weak.
- Long vertical vent runs in hillside and condo buildings: Many Universal City structures have dryer vents that rise 20 feet or more before they reach an exterior wall. Those long runs trap lint faster than typical single-story residential vents, and cleaning them requires equipment sized for that rise.
- Resort-district scheduling collisions: A vent cleaning call inside the Universal Studios or CityWalk corridor that books during normal operating hours often stalls at a gate or parking barrier. We schedule around the property’s actual open hours, which is why our confirmed time-to-arrival sometimes hits earlier than the rest of the Valley.
- Shared vent stacks in multi-unit and converted buildings: Several 91608 condo and hospitality structures share duct runs between units. One tenant’s lint problem can point to a larger blockage in the shared stack, and clearing only one segment often doesn’t fix the underlying issue.
Pricing for Dryer Vent Cleaning in Universal City, CA
A standard dryer vent cleaning in Universal City runs $149 – $289 depending on the vent run’s length, the number of bends, and whether the exterior termination is accessible from ground level or requires roof or ladder work. A short residential run in a single-family home along the hillside typically lands at the lower end of that range. A long rise in a condo building or resort structure, or a vent that’s packed with years of compacted lint, runs higher. If you’re in a commercial or hospitality building with a shared stack and multiple dryer connections, the job may involve several segments and we’ll give you a flat price up front before any work starts. Call (855) 554-2841 for a free estimate. We’ll tell you the number before we schedule, so there’s no guesswork.
| Service | Universal City Price Range |
|---|---|
| Standard dryer vent cleaning (short run) | $149 – $189 |
| Long or multi-bend vent run | $189 – $249 |
| Hillside, roof, or ladder-access termination | $219 – $289 |
| Commercial or shared-stack vent segment | Quoted per property |
We Also Serve Cities Near Universal City
Our service area covers Universal City and the surrounding communities along the 101 corridor: Studio City, North Hollywood, Hollywood, and West Hollywood. If your property sits just over the line in any of those cities, Dryer Vent Cleaning in Universal City is still our home base for scheduling, and we’ll route the closest tech to you without making a separate appointment system.
Serving Universal City, CA — Our Local Coverage Area
We’re based in the Universal City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Universal City
Because the risk in 91608 isn’t creosote from heavy burning, it’s leaf litter and wind-blown dust packing the cap and flue through the long dry season. A newer factory-built fireplace can look clean from the firebox while the prefabricated chase above it is half-blocked with debris. An annual inspection catches that before draft problems or smoke-back into the room become the first symptom. Call (855) 554-2841 if yours hasn’t been looked at this year.
Yes. We schedule Universal City resort-district vent work around the property’s operating hours, which usually means an early-morning slot before the venue opens or an overnight window after close. We coordinate access with property managers ahead of time, so the cleaning happens when the building is quiet. Tell us the property’s hours when you call (855) 554-2841 and we’ll work to that schedule.
We check the cap and termination for debris accumulation, the interior of the prefabricated chase, the smoke chamber and damper area, the flue liner condition including the seams, and the firebox refractory panels. On hillside Universal City units, the biggest finding is almost always wind-blown leaf litter and dust compacted against the cap or inside the chase. We clear that, run the inspection, and give you a photo report of anything we find.
A lazy draft in a Universal City prefab fireplace is usually a debris-blocked cap or chase, not the flue itself. We’ve pulled wind-blown leaf litter out of chases on hillside structures where the fireplace was only a few years old and never burned well because the termination was already obstructed. The fix is usually clearing the flue and cap, resetting the termination, and sometimes cleaning the smoke chamber and damper area. We’ll know for sure once we get eyes on the full run. Call (855) 554-2841 and we’ll schedule the inspection.
We work with professional-trade materials including DuraFlex liner systems, Gelco caps, and Olympia Chimney termination components. When a Universal City prefab fireplace needs a cap replaced or a liner section swapped, we carry the parts that certified chimney contractors specify rather than a generic hardware-store version. If you tell us your fireplace’s manufacturer and model number when you call (855) 554-2841, we’ll confirm what we can match before we arrive.
Written by Ruben Acosta, Owner at Hickory Chimney Sweep, serving Universal City and the surrounding 91608 corridor.