Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Rowland Heights, CA
Chimney repair in Rowland Heights usually means one of two things: a clay liner that has cracked after forty-plus years of heat cycling, or a chimney cap that has been battered by Santa Ana winds and is now letting rain, leaves, and birds into the flue. Homes here were mostly built between the 1960s and 1980s, and the original masonry work is now at the age where small problems become structural ones quickly. Hickory Chimney Sweep has served Rowland Heights since 2013, and we handle the repair work most local sweeps document and then hand off to someone else. Call (855) 554-2841 for a straight answer on what your chimney actually needs.
Why Rowland Heights Homes Are Different
Rowland Heights sits on the hillside edge of the San Gabriel Valley, and that geography shapes almost every chimney job we do here. The home stock is mostly single-family ranch and split-level tract homes built between the 1960s and 1980s, many with original masonry fireplaces and clay-tile flue liners. Those liners were never designed to last forever, and on the windy south-facing foothill lots above Colima Road we see a pattern: chimneys sit dormant through long dry summers, then get fired up hard during winter cold snaps and holiday gatherings. Creosote builds up unnoticed, and Santa Ana events push leaf litter, twigs, and nesting material straight down open flues or into clogged spark arrestors.
Homes that back onto the Puente Hills have their own rhythm. We regularly pull bird nests, squirrel debris, and the odd raccoon surprise out of flues on properties where the hillside is essentially the backyard. A decorative fireplace that sees one weekend of use per year can still be fully blocked by a season of animal activity. The dry air also means any moisture that does get into a flue evaporates fast but not before it works on mortar joints. Rowland Heights is not a high-burn community. It is a high-inspection community, and the right repair at the right time keeps a lightly used fireplace safe for the few nights a year it actually matters.
Styles & brands we work with
Our Main Rowland Heights Services
Most Rowland Heights homeowners call us for one of two jobs: a thorough cleaning of a lightly used masonry fireplace, or a dryer vent that has not been touched since the house was purchased. Both are fire-safety work, and one call covers both.
Chimney Sweep in Rowland Heights
A chimney sweep in Rowland Heights is rarely about removing heavy creosote from daily wood burning. It is about clearing what the hills and wind put into the flue during months of disuse: leaf litter, nests, spider webs, soot from occasional fires, and the fine debris that drops down from a deteriorating clay liner. We inspect as we clean, so if the sweep turns up cracked flue tiles or a failed cap, we can tell you exactly what we saw and whether it needs attention now or can wait. Chimney Sweep in Rowland Heights covers the full job, including camera inspection when conditions call for it.
Dryer Vent Cleaning in Rowland Heights
Dryer vent cleaning is the second half of what we do, and in Rowland Heights it matters just as much as chimney work. Lint accumulation inside a dryer duct is a leading cause of residential appliance fires, and the long vent runs common in 1970s and 1980s ranch homes make buildup worse. Hot dry summers bake the lint into a dense mat that restricts airflow and forces the dryer to run longer and hotter. If your dryer takes two cycles to dry a load, the vent is the likely culprit. Dryer Vent Cleaning in Rowland Heights explains signs, costs, and what we actually do on the job.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Rowland Heights
Chimney repair in Rowland Heights usually starts with a problem we find during a sweep: a clay liner with visible cracking, a cap that has blown loose or rusted through, flashing that has pulled away from the roofline after decades of wind and heat. The 1960s and 1970s masonry fireplaces in this area were built well, but nothing lasts forever, and the dry Santa Ana cycles put real stress on mortar joints and metal components. Homes above Colima Road get the worst of the wind, and we see cap and flashing failures there more than anywhere else in the city. Our Chimney Repair service is a standalone line of work, not a subcontracted add-on, which means we diagnose and fix problems ourselves using professional-grade materials like HeatShield and DuraFlex systems.
Chimney Cap Installation
Signs you need it
You see rust staining on the chimney crown, hear animals in the flue, or find leaf litter and twigs inside the firebox after windy weather.
What it costs in Rowland Heights
Chimney cap installation in Rowland Heights typically falls between $150 and $600 depending on flue size, material, and whether custom fabrication is needed.
How we do it
We measure the flue, match a cap from Famco or Copperfield to the opening, and secure it with mechanical fasteners so a Santa Ana gust will not lift it off.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, bent from falling branches, or missing entirely, leaving the flue open to rain and nesting animals.
What it costs in Rowland Heights
Chimney cap replacement runs $150 to $600 in Rowland Heights, with the final number set by flue dimensions and whether the old cap left damage on the crown.
How we do it
We remove the failed cap, inspect the flue edge, and install a correctly sized replacement with a spark arrestor screen rated for the firebox below.
Chimney Liner Installation
Signs you need it
An inspection shows cracked clay tiles, gaps in the flue, or white staining on the exterior brick that signals combustion gases are leaking through the liner.
What it costs in Rowland Heights
A full chimney liner installation in Rowland Heights typically runs $2,500 to $7,500, with the range driven by flue length, access difficulty, and liner type.
How we do it
We size the flue, install a DuraFlex flexible liner system or apply HeatShield resurfacing depending on damage severity, and verify the connection from firebox to cap.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, damp brick after rain, or flashing metal that has lifted away from the roofline.
What it costs in Rowland Heights
Chimney flashing repair in Rowland Heights generally costs $200 to $700, depending on whether we are resealing, patching, or replacing the flashing entirely.
How we do it
We remove the old sealant, inspect the flashing base, and install new step or counter flashing with proper lap and sealant so water drains away from the flue.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalled, or has visible chipping that lets water soak into the masonry below.
What it costs in Rowland Heights
Chimney crown repair in Rowland Heights is typically $300 to $900, depending on how much of the crown must be removed and repoured.
How we do it
We chip away loose material, build a proper form, and pour a new crown with a drip edge and the right slope to move water away from the flue tile.
What Chimney Repair Costs in Rowland Heights
| Item | Typical range in Rowland Heights |
|---|---|
| Chimney cap installation | $150 – $600 |
| Chimney liner installation | $2,500 – $7,500 |
| Crown repair | $300 – $900 |
How long does chimney repair take in Rowland Heights?
Most cap and flashing repairs are done in one visit. Liner installs and crown repours usually take a day, though a full reline on a tall two-story chimney on a hillside lot can stretch into a second day.
Can I wait until fall to fix my Rowland Heights chimney?
If the damage is limited to a cosmetic crack in the crown, you can usually wait a few months. If the flue liner is cracked or the cap is missing, do not burn again until it is fixed.
Brands We Service in Rowland Heights
We stock and install professional-grade chimney parts from Famco, Copperfield, DuraFlex, and HeatShield, not hardware-store generics. Most cap and crown materials are on our trucks when we arrive, which keeps a typical Rowland Heights repair to a single visit. See our brands for details on what we carry and why we chose each supplier.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Rowland Heights, CA
| Service | Typical range in Rowland Heights |
|---|---|
| Chimney sweep (standard masonry fireplace) | $175 – $350 |
| Chimney cap installation | $150 – $600 |
| Chimney cap replacement | $150 – $600 |
| Chimney liner installation | $2,500 – $7,500 |
| Chimney flashing repair | $200 – $700 |
| Chimney crown repair | $300 – $900 |
| Dryer vent cleaning | $100 – $250 |
| Chimney inspection (visual) | $100 – $200 |
Prices in Rowland Heights push toward the higher end when the chimney is on a steep hillside lot, the flue is unusually tall, or access requires scaffolding on a split-level roofline. We give you a written price before any work begins, and the number we quote is the number you pay.
Neighborhoods We Serve in Rowland Heights
We work throughout the 91748 ZIP code, from the older ranch tracts near Pathfinder Road to the hillside homes backing onto the Puente Hills. Our techs know the local roof pitches and flue styles well enough that we usually arrive with the right parts on the first trip.
- Rowland Heights Civic Center area
- Homes above Colima Road
- Pathfinder Road tract
- Puente Hills foothill lots
- Blandford Drive area
Response time across Rowland Heights is typically two to five business days for non-urgent repair work.
Service Area – Cities Near Rowland Heights
Hickory Chimney Sweep also covers the communities directly around Rowland Heights. If you are in South San Jose Hills, CA, Walnut, CA, Valinda, CA, or Hacienda Heights, CA, the same crew and the same materials are available. The hillside conditions that shape chimney work in Rowland Heights continue into these neighboring cities, so we spec repairs the same way across the area.
Serving Rowland Heights, CA — Our Local Coverage Area
We’re based in the Rowland Heights area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Rowland Heights
Most cap, crown, flashing, and liner repairs do not require a city permit because they are maintenance on an existing structure. If the work ever crosses into full chimney rebuild territory, permitting would be handled at that point, and we would walk you through it.
Most appointments are scheduled within two to five business days. If you have an active leak or an animal in the flue, tell us when you call and we will try to move you up the schedule.
Yes. We serve the entire 91748 ZIP code, including homes above Colima Road, the Pathfinder Road tract, and foothill lots backing onto the Puente Hills. Call (855) 554-2841 to confirm your address and set up a visit.
For a free estimate on chimney repair, a chimney sweep, or dryer vent cleaning in Rowland Heights, call Hickory Chimney Sweep at (855) 554-2841. We will give you an honest read on what you need and what can wait.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rowland Heights Customers Say
"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."
— Luis Castillo"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carlos Rodriguez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Leela Reddy