Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Torrance, CA
Chimney repair in Torrance usually means addressing cracked clay-tile flues, rusted dampers, and failed mortar crowns on homes built between the 1950s and 1970s. Most of these original masonry fireplaces were designed for occasional ambiance fires, not the regular cool-evening burning Torrance homeowners actually do. That mismatch is exactly what we see when we open up a flue here. If your fireplace hasn’t been inspected in years, call us at (855) 554-2841 and we’ll tell you honestly what needs attention and what can wait.
Why Torrance Homes Are Different
Torrance sits inland enough from the coast to develop real burn-season habits, unlike Manhattan Beach or Redondo Beach where marine fog shortens fireplace season. The housing stock is mostly post-war tract homes from the 1950s through the 1970s: mid-century ranches and Spanish-style stucco builds with original brick or masonry fireplaces. Those chimneys shipped with clay-tile flues sized for light use, and many have never been relined. The 90501 and 90503 ZIP codes contain the oldest blocks, where we regularly find original flues that have never been touched.
Two local conditions drive most of what we repair here. First, the marine-layer humidity that settles in on cool evenings glazes creosote inside flues, making it harder to remove and more likely to hold heat. Second, Torrance sits on clay soils that shift, and nearby seismic activity has put hairline cracks in thousands of old clay liners. A fireplace can look perfectly fine from the hearth while the flue behind it is compromised. The damp season also accelerates rust on caps and dampers, so spring inspections often turn up corrosion that wasn’t there in the fall. In this city, an annual inspection isn’t overkill. It’s the only way to catch what the clay soil and salt air are doing to your chimney before it becomes a fire hazard.
Styles & brands we work with
Our Main Torrance Services
Torrance homeowners call us for two fire-safety jobs more than anything else: cleaning the chimney that vents their wood-burning fireplace or gas insert, and clearing the dryer vent that runs behind their laundry room wall. Both are leading sources of residential fires, and one call covers both.
Chimney Sweep in Torrance
A proper sweep in Torrance is not just brushing soot. It’s removing glazed creosote that forms from low, inefficient burns in cool marine air, then checking the flue for the hairline cracks this city’s clay soil is known for. Our Chimney Sweep in Torrance service includes a camera inspection of the flue so you see what we see, and we flag only what needs attention now versus what can safely wait. Most sweeps in 90501 and 90503 take under two hours.
Dryer Vent Cleaning in Torrance
Torrance’s dry air and the long dry season put extra lint in older dryer duct runs, especially in 1950s and 1960s homes where the vent path was an afterthought. Lint ignites fast and burns inside the wall where you can’t see it. Our Dryer Vent Cleaning in Torrance service clears the full run from dryer to exterior cap and tests the airflow so the job is verified, not just claimed. If you haven’t had the vent done in two years, we’ll find enough lint to justify the trip.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Torrance
Chimney repair in Torrance is dominated by two jobs: replacing cracked clay-tile flues that seismic activity and shifting clay soil have compromised, and repairing mortar crowns and flashing that the damp marine season has slowly eaten away. We repair what we find during a sweep using professional-grade systems like Chimney Repair materials, so a cracked flue gets relined on the spot instead of handed off to a mason we don’t know.
Chimney Cap Installation
Signs you need it
Your chimney has no cap, or the cap is rusted through from Torrance’s damp, salt-tinged air and no longer keeps rain, debris, and embers out.
What it costs in Torrance
Chimney cap installation in Torrance typically runs $300 – $650 depending on flue size and whether a custom bracket is needed for an older masonry crown.
How we do it
We measure the flue opening, install a stainless or copper cap sized to the flue, and secure it so the next Santa Ana wind event doesn’t turn it into a projectile.
Chimney Cap Replacement
Signs you need it
The cap is still there but rusted through, missing mesh, or letting water down the flue after rain.
What it costs in Torrance
Chimney cap replacement in Torrance usually lands between $250 – $500, with the final number set by the cap material and the condition of the crown it sits on.
How we do it
We remove the old cap, check the flue opening for damage, and install a new cap rated to keep embers and birds out while letting the flue draft correctly.
Chimney Liner Installation
Signs you need it
Your clay-tile flue is cracked in multiple places, or you’ve retrofitted a gas insert into an old masonry fireplace without a properly sized liner.
What it costs in Torrance
Chimney liner installation in Torrance typically runs $2,500 – $5,500, with final price driven by flue height, liner diameter, and access from roof or hearth.
How we do it
We size a DuraFlex flexible liner to the flue, pull it from the top down, insulate it where needed, and connect it to the appliance so the system vents the way the manufacturer intended.
Chimney Flashing Repair
Signs you need it
You have water staining on the ceiling near the fireplace, or the flashing where the chimney meets the roofline is pulled away, cracked, or missing sections.
What it costs in Torrance
Chimney flashing repair in Torrance typically costs $400 – $900, depending on whether we’re patching a section or replacing the full perimeter.
How we do it
We remove the failed flashing, inspect the underlayment for rot, and install new flashing sealed to both the masonry and the roof deck so water runs off instead of in.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of the chimney has cracks, spalling, or is eroded enough that water is soaking into the masonry below it.
What it costs in Torrance
Chimney crown repair in Torrance generally runs $600 – $1,200, depending on crack severity and whether a full crown rebuild is needed.
How we do it
We clean the crown, fill hairline cracks with a flexible sealant, or form and pour a new crown with a proper drip edge so water stops pooling and penetrating.
What Chimney Repair Costs in Torrance
| Item | Typical range in Torrance |
|---|---|
| Chimney cap replacement | $250 – $500 |
| Chimney cap installation | $300 – $650 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $600 – $1,200 |
| Chimney liner installation | $2,500 – $5,500 |
How often should a chimney be repaired or inspected in Torrance?
Inspect it every year before burn season. This city’s clay soil shifts enough that a flue that passed last fall can show hairline cracks by spring, especially in older 90501 and 90503 blocks. Call (855) 554-2841 to schedule an inspection if it’s been more than twelve months.
Do I really need a new liner, or can the old one be patched?
We’ll show you the camera footage before recommending anything. If the cracks are isolated, a HeatShield resurfacing can sometimes restore the existing flue. If deterioration is widespread, a DuraFlex liner is the lasting fix. Call (855) 554-2841 and we’ll give you a straight answer.
Brands We Service in Torrance
We stock and install materials from HeatShield, Gelco, Olympia Chimney, and Famco. These are the same professional-grade brands certified chimney contractors specify, and we keep common parts available for fast turnaround in Torrance. See our brands for details on what we install and why we chose each manufacturer.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Torrance, CA
| Service | Typical range in Torrance |
|---|---|
| Chimney sweep (Level 1 inspection included) | $189 – $329 |
| Chimney sweep with Level 2 camera inspection | $279 – $449 |
| Chimney cap replacement | $250 – $500 |
| Chimney cap installation | $300 – $650 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $600 – $1,200 |
| Chimney liner installation | $2,500 – $5,500 |
| Dryer vent cleaning | $129 – $249 |
What pushes price up in Torrance is flue access. Steep-pitch roofs on Spanish-style stucco homes in the 90502 blocks and the 90510 industrial corridor can add scaffold time, and old mortar crowns that haven’t been sealed in twenty years often reveal more damage once we open them up. You get a firm price before work starts, so the number we quote is the number you pay.
Neighborhoods We Serve in Torrance
We cover all Torrance ZIP codes including 90509, 90510, 90501, and 90502, and most calls come from these neighborhoods:
- Old Torrance
- Southwood
- Walteria
- Seaside
- Harbor Gateway
Most Torrance jobs are scheduled within five to seven business days, and we batch calls by neighborhood so your visit aligns with other work in the area.
Service Area – Cities Near Torrance
Hickory Chimney Sweep also works in the neighboring South Bay communities. We serve Lomita, CA directly to the east, West Carson, CA and Carson, CA to the north, and Manhattan Beach, CA along the coast. If you’re in one of these cities and your chimney hasn’t been inspected recently, the same team covers your area.
Serving Torrance, CA — Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Torrance
Most chimney repair work in Torrance, including liner installation and crown repair, does not require a city permit when it’s a repair rather than new construction. A full teardown and rebuild would. We’ll tell you before work starts if your job falls into that category, and we handle the coordination if it does.
Most Torrance calls are scheduled within five to seven business days, and inspection findings are documented with camera footage you can watch. If you have active water intrusion or a suspected flue crack, call (855) 554-2841 and we’ll prioritize the visit based on what you’re seeing.
Yes. One call covers both the chimney and the dryer vent in your Torrance home. We’ll inspect, clean, and repair both systems in the same visit when you book them together, which saves a second trip and gives you a complete fire-safety check for the two most common residential fire sources.
Call (855) 554-2841 for a free estimate on chimney repair, sweep, or dryer vent cleaning in Torrance.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Torrance Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carlos Rodriguez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Leela Reddy"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Dustin Hoffman