Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Brea, CA
Most chimney repair calls we take in Brea come from homes built between the 1960s and 2000s – mid-century ranch houses near downtown, plus Mediterranean and Spanish-style stucco homes in the North Hills. The work here leans toward chimney caps, flashing, and clay tile liners that have baked under decades of dry heat. Santa Ana winds push debris against hillside chimneys in 92823, and that debris accelerates cap and crown wear. This page covers what we actually do in Brea, what repair work costs here, and how to know when your chimney needs attention. Call (855) 554-2841 if you’d like a straight answer about your chimney.
Why Brea Homes Are Different
Brea’s chimney work is dominated by fireplaces that are decorative or occasional rather than heating-critical. Many homes in the Olinda-area hillside tracts and North Hills (92823) have fireplaces sized for ambiance, often with gas logs, so the real demand is annual safety inspection and creosote maintenance on lightly-used flues that still sit against the city’s dry Santa Ana wind conditions. A chimney that only burns a few times per winter still collects debris, and in Brea the debris is specific: palm fronds, eucalyptus leaves, and ash from nearby canyon brush fires pack into caps and screens. We routinely clear bird nests from chimneys on hillside properties where stucco exteriors and manufactured fireplace inserts are common. The dry, windy autumns mean a missing or damaged spark arrestor isn’t a cosmetic issue here – it’s a fire hazard. Brea’s newer homes in 92823 often have prefab metal fireboxes with masonry chimneys and clay tile liners, and those liners don’t last forever in this climate.
Styles & brands we work with
Our Main Brea Services
Most Brea homeowners call us for two things: an annual sweep to keep a lightly-used fireplace safe, and dryer vent cleaning to reduce the leading cause of appliance fires. One call covers both.
Chimney Sweep in Brea
A sweep in Brea usually runs forty-five minutes to an hour and a half, depending on how much wind-driven debris has collected. Homes in 92823 near the canyon edges get more palm fronds and eucalyptus leaves in the cap than homes closer to downtown, and we clear all of it as part of the visit. We also check the spark arrestor carefully because of Brea’s dry autumns and surrounding brush. Since many local fireplaces only see occasional use, creosote buildup tends to be light, which makes annual maintenance straightforward. See Chimney Sweep in Brea for the full breakdown.
Dryer Vent Cleaning in Brea
Dryer vents in Brea’s older ranch homes often run longer than newer construction, with more turns, and that means lint accumulates faster. The same Santa Ana winds that dirty chimneys also push outdoor dust into dryer terminations. We clean the full vent run, check the exterior termination cap, and confirm airflow at the dryer. Many customers book this the same visit as a chimney sweep, since our technicians are already at the house. See Dryer Vent Cleaning in Brea for scope and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Brea
Most chimney repair work in Brea involves clay tile liners that have cracked after decades of dry heat, and caps or crowns that have been battered by Santa Ana wind debris. Homes in the North Hills and Olinda-area tracts sit at higher elevation where wind exposure is constant. When a cap screen tears or a crown develops hairline cracks, water and embers get in. We inspect with cameras, show you what we found, and only recommend work that the footage supports. Chimney Repair covers the full scope.
Chimney Cap Installation
Signs you need it
You can see daylight through a rusted or missing cap, or birds are getting into the flue.
What it costs in Brea
Chimney cap installation in Brea typically runs $300 – $600 depending on the flue size and the cap material.
How we do it
We measure the flue, install a stainless or copper cap sized to the opening, and secure it so wind can’t lift it.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, the screen mesh has holes, or the cap no longer sits flush.
What it costs in Brea
Chimney cap replacement in Brea typically falls between $350 – $750 including removal of the old cap and new hardware.
How we do it
We remove the old cap, check the flue opening for damage, and install a replacement that matches the chimney’s dimensions.
Chimney Liner Installation
Signs you need it
Your clay tile liner is cracked, spalling, or missing sections, or a camera inspection shows gaps between tiles.
What it costs in Brea
Chimney liner installation in Brea can start around $1,000 – $4,500 depending on the liner type and flue size.
How we do it
We clean the flue first, then install either a DuraFlex flexible liner system or a rigid liner and connect it to the appliance.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, or the flashing is pulling away from the roofline.
What it costs in Brea
Chimney flashing repair in Brea typically runs $400 – $900 depending on how much flashing must be replaced.
How we do it
We remove the damaged flashing, install new step and counter flashing, and seal it with high-temperature roofing sealant.
Chimney Crown Repair
Signs you need it
The crown has visible cracks, spalling, or standing water after rain.
What it costs in Brea
Chimney crown repair in Brea typically runs $350 – $800 for a proper crown with a drip edge and weather seal.
How we do it
We clean the crown, fill cracks, then apply HeatShield or a cementitious crown sealer and shape it so water runs off.
What Chimney Repair Costs in Brea
| Item | Typical range in Brea |
|---|---|
| Chimney cap installation | $300 – $600 |
| Chimney cap replacement | $350 – $750 |
| Chimney crown repair | $350 – $800 |
| Chimney flashing repair | $400 – $900 |
Do I really need a new chimney liner?
Only if the camera inspection shows cracks, gaps, or spalling that can’t be sealed. We show you the footage before we recommend anything. If the liner is safe, we say so plainly.
How often should a chimney in Brea be swept?
At least once a year, even if you only burn occasionally. Debris from Santa Ana winds packs into caps and screens, and a blocked flue is a fire hazard regardless of how often you use the fireplace. Call (855) 554-2841 to schedule.
Brands We Service in Brea
We work with professional-trade brands including HeatShield, Gelco, Olympia Chimney, and Famco. The HeatShield resurfacing system is available for liners with minor damage, and we stock common cap and crown parts locally so typical repairs don’t wait on shipping. See our brands for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Brea, CA
| Service | Typical range in Brea |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $300 – $600 |
| Chimney cap replacement | $350 – $750 |
| Chimney liner installation | $1,000 – $4,500 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $350 – $800 |
| Dryer vent cleaning | $150 – $300 |
Prices in Brea push up when a chimney sits on a steep hillside lot in 92823 and roof access requires extra safety rigging. We quote flat prices before any work starts, and the quote includes the camera inspection, so you never pay to discover what’s wrong.
Neighborhoods We Serve in Brea
We work across all of Brea, including every zip code in the city: 92821, 92822, and 92823. Our technicians are in the area most weeks, and we can often schedule a visit within a few days of your call.
- North Hills (92823)
- Olinda-area hillside tracts
- Downtown Brea
- Country Hills
- Eagle Hills
Service Area – Cities Near Brea
Hickory Chimney Sweep also serves Rowland Heights, CA, Fullerton, CA, La Habra Heights, CA, and La Habra, CA. If you’re in a neighboring city and have a chimney or dryer vent that needs attention, call us and we’ll let you know if we can get there this week.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Brea
Most chimney sweeps, cap replacements, and liner repairs don’t require a city permit. If you’re adding a new fireplace or changing your roofline, the rules differ. We’ll tell you what applies before any work begins.
We schedule most Brea visits within three to five business days. During the fall, before Santa Ana winds pick up, we get busier, so calling earlier in the season gets you a spot sooner.
We clean the flue, clear the cap and spark arrestor, inspect the firebox and liner, and send you a camera report. Since Brea’s dry autumns make cap integrity critical, we spend extra time on that part of the job.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brea Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Allen Tran"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."
— Luis Castillo"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carlos Rodriguez